NEW Accessory: A 1942 AC/DC Current Clamp Probe
|
|
The new A 1942 AC/DC Current Clamp Probe is a special accessory for measurements in photovoltaic systems where there is a need to measure both the DC (from the photovoltaic panels) and the AC (on the AC side of a photovoltaic inverter) currents. The A 1942 AC/DC Current Clamp Probe has several measurement ranges (selectable using a rotary switch) for DC and AC currents; from a few milliamperes to a few hundred amperes.
|
|
The connection terminals (banana plugs) on the A 1942 AC/DC Current Clamp Probe are arranged for direct use with the MI 3108 EurotestPV and MI 3109 EurotestPV Lite.
|
|
Overview of A 1942 AC/DC Current Clamp Probe
AC current measurement range:
- 4 A -> measuring constant 100 mV/A
- 40 A -> measuring constant 10 mV/A
- 200 A -> measuring constant 1 mV/A
DC current measurement range:
- 40 A -> measuring constant 10 mV/A
- 200 A -> measuring constant 1 mV/A
Applications:
- AC and DC current measurements using MI 3108/3109 PV instruments.
- AC and DC current measurements with supported DMMs.
- AC and DC current measurements with an oscilloscope (connection adapter from banana to BMC connector not included).
|
|
Technical characteristics:
Measurement category clamp-meter
Maximum current
Pollution degree
Operation
Protection class
Altitude
Operation temperature
Storage temperature
Temperature coefficient
Range selection
E.M.C.
Safety
Power supply
Type of batteries
Consumption
Dimensions
Weight
|
CAT III 600V
200 A
2
Indoor
IP 30
< 2000 m
0 °C – 50 °C (<85 % H.R., <10 °C)
-20 °C – +60 °C (<75 % H.R.)
0.15 x / °C (< 18 °C or > 28 °C)
Manual selection
Emission: Class B
External mag. field rejection: < 30 A/m.
Meets EN 61326-1:2013
Meets EN 61010-1:2010 +A1:2019 and
EN 61010-2-032:2021 +A11:2021
3 V
2 x 1,5 V AA alkaline batteries
25 mA average
152 mm (L) x 66 mm (W) x 36 mm (H)
Approx. 250 g (battery included)
|
|
Specifications:
Range
DCA 0-40A
DCA 0-150A
DCA 150-200A
ACA 0-4A
ACA 0-40A
ACA 0-150A
ACA 150-200A
|
Output
DC 10mV/A
DC 1mV/A
DC 1mV/A
AC 100mV/A
AC 10mV/A
AC 1mV/A
AC 1mV/A
|
Accuracy @ CF = 1.41
±1.0% ± 0.02A
±1.0% ± 0.2A
-2.2% ± 0.2A
±2.0%±0.005A
±1.5% ± 0.03A
±1.5%±0.3A
-2.5%±0.3A
|
|
Note: The A 1942 AC/DC Current Clamp Probe has the same I/U constant as the existing A 1391 AC/DC Current clamp. The A 1942 AC/DC Current Clamp Probe will be added into the MI 3108 EurotestPV/MI 3109 EurotestPV Lite clamp selection menu.
|
|
Clamp comparison (measurement range):
A 1391 AC/DC Current clamp A 1942 AC/DC Current Clamp Probe
40 A 40 A
300 A 200 A
The A 1942 AC/DC Current Clamp Probe is in stock and available immediately.
|
|
Partner newsletter: This newsletter was sent only to you, our partner, and not to any end customers.
|
|
Metrel d.o.o.
| Ljubljanska c. 77 | | SI-1354 Horjul | | Slovenia |
|
|
|
|
