Latest PowerView3.0 & firmware
|
|
Our line of power quality analysis products is subject to constant innovation and improvements, and that likewise includes software like the PowerView3.0. The latest iteration is version 3.0.0.5555, which brings several new features and improvements.
|
|
List of changes for PowerView3.0 (version 3.0.0.5555):
- Implementation of Transformer Derating Factor (TDF) calculation based on EN 50541-2/EN 50464-3 or IEEE Std. C57.110 standard/recommended practice (TDF defines the loss factor on a distribution transformer due to the current harmonics).
|
|
- Introduction of efficiency parameter presentation as Pac/Pdc (Photo-Voltaic, Ups) or Pac/Pds (EVSE chargers).
- Upgrade of Codigo de Red report, Version 2.0.
- Addition of Lithuanian localisation.
- Addition of parameterisation of the E-Meter recorder for doing measurements on the primary side of a transformer.
- Compatible with Windows 11.
|
|
Besides new PowerView3.0 version, we have also released new firmware for MI 2893 Power Master XT, MI 2892 Power Master, MI 2885 Master Q4, MI 2884 Energy Master XA and MI 2883 Energy Master power quality analysers.
|
|
List of FW changes for MI 2892/2892/2885 (hardware HW9.0):
|
|
- Custom folder naming (where all recorded data are saved) – for easy data selection and organization in cases where a lot of measurements were done on different locations.
|
|
- Introduction of efficiency parameter presentation as Pac/Pdc (Photo-Voltaic, Ups) or Pac/Pds (EVSE chargers).
- Addition of Lithuanian localisation.
|
|
List of FW changes for MI 2892/2885 (hardware HW9.0):
|
|
- Analysis of measuring accuracy of electricity meters (kWh/kvarh) on the primary side of a transformer.
|
|
List of FW changes for MI 2884/2883:
- Removal of “flat” data structure organisation on the SD card (folder structure by default).
- Addition of Lithuanian localisation.
|
|
Metrel d.d.
| Ljubljanska c. 77 | | SI-1354 Horjul | | Slovenia |
|
|
|
|
