MI 3325 Standard set Featured

3-phase test adapter for installation safety testing on 3-phase sockets type 16 A 3CEE.

3-phase adapter with selection switch for installation safety testing on 3-phase sockets type 16 A 3CEE. The adapter allows seamless switching between measurements.

Licence key for upgrading the Metrel ES Manager to advanced version with professional report creation and Excel PRO export functionality. Please contact your local dealer for more information on how to order the licence key.

2 pieces of extension test lead for continuity measurements.

RS232 interface cable for connecting the instrument with the PC.

Extension test leads with protection shield and with crocodile clips for continuity testing with high test currents (10 A, 25 A).

T-type power splitter for measurements of discharge time on machinery and switchgear.

Extension test leads for continuity measurements.

Move data between your computer and memory card with memory card reader.

Remote control pedal is used for safe remote start of high voltage insulation test and additionally allows free hand operation of the worker.

Warning lamps visually signalize ongoing HV insulation test and warn the user about dangerous voltage conditions for use with A 1460. If A 1496 is used in combination with MI 3325 or MI 3394, an external power supply adaptor A 1499 shall be used.

Colour - LED signal tower with build-in buzzer visually and acoustically signalizes ongoing tests and test conditions for use with A 1460. If A 1497 is used in combination with MI 3325 or MI 3394, an external power supply adaptor A 1499 shall be used.

If the LED tower lamp is used in combination with MI 3325 or MI 3394, the external power supply should be used.

Tip commander serves as a remote control for execution of passive tests, when used in combination with A 1460. Or for execution of 4-wire continuity test when used directly from MI 3325. The commander has a built in LED torch lamp including PASS/FAIL status LED's and start key for execution of the tests. When used directly from MI 3325 the connection cable A 1583 must be used.

High voltage extension test leads for measurements on larger electrical equipment.

High voltage test leads with pistols for measurements on larger electrical equipment.

The 3-phase adapter for substitute leakage current, insulation resistance and continuity measurements on electric loads equipped with 16A and 32A CEE 3P sockets.

Printer supports printing of bar-codes which contain a complete appliance information and PASS or FAIL status of result, or QR codes which contain information of the previous results, the test status, and the previously used test sequence. Printer supports printing of simple labels including PASS or FAIL status of result, Appliance name, ID number, User information and test date.

3-phase adapter for testing 3-phase appliances.

3-phase adapter for testing 3-phase appliances.

Metrel’s A 1422 Multifunctional test adapter is designed for troubleshooting, as well as for periodic testing on 3-phase appliances and machinery. Unique functions such as, active polarity testing, differential leakage testing and testing of 3-phase RCD’s make the A 1422 Active 3-phase Adapter an ideal instrument for advanced applications. The A 1422 adapter is designed for use alongside the MI 3325 MultiServicerXD, and MI 3360 OmegaGT series, enabling functional tests to be carried out on machines up to 40 A. Several test socket outlets make this instrument an ideal tester for testing industrial extension leads that may also be RCD protected. The A 1422 Multifunctional test adapter has complete support for testing of Arc Welding Equipment in accordance to EN 60974-4 and VDE 0544-4.

Metrel’s A 1322 Multifunctional test adapter is designed for troubleshooting, as well as for periodic testing on 3-phase appliances and machinery. Unique functions such as, active polarity testing, differential leakage testing and testing of 3-phase RCD’s make the A 1322 Active 3-phase Adapter an ideal instrument for advanced applications. The A 1322 adapter is designed for use alongside the MI 3325 MultiServicerXD, and MI 3360 OmegaGT XA series, enabling functional tests to be carried out on machines up to 40 A. Several test socket outlets make this instrument an ideal tester for testing industrial extension leads that may also be RCD protected. The A 1422 Multifunctional test adapter has complete support for testing of Arc Welding Equipment in accordance to EN 60974-4 and VDE 0544-4.

Measuring adapter for leakage current measurements: for measuring differential leakage current, protective conductor current, neutral current and load current, through leakage current clamp. All wires are separated.

Measuring adapter for leakage current measurements: for measuring differential leakage current, protective conductor current, neutral current and load current, through leakage current clamp. All wires are separated.

Measuring adapter for leakage current measurements: for measuring differential leakage current, protective conductor current, neutral current and load current, through leakage current clamp. All wires are separated.

Spare label roll for s 2062, (2500 labels per roll)

NFC labels have sufficient memory space to store test results, test code and tested appliance information

Spare label roll for s 2062, 45x90 mm, (800 labels per roll).

Tip commander serves as a remote control for execution of passive tests, when used in combination with A 1460. Or for execution of 4-wire continuity test when used directly from MI 3325. The commander has a built in LED torch lamp including PASS/FAIL status LED's and start key for execution of the tests. When used directly from MI 3325 the connection cable A 1583 must be used.

NFC reader / writer allows to read and upload test results and information about tested electrical equipment to the NFC tags (NTAG 216).

NFC tags have sufficient memory space to store test results, test code and tested appliance information

NFC cable-ties have sufficient memory space to store test results, test code and tested appliance information

Current clamp with high resolution for accurate leakage current measurements.

The A 1578 adapter enables the connection of external USB keyboard, for easy data entering.

A 1585 is a rack mount adapter for 19” rack, which is designed to hold the MI 3325 MultiServicerXD. This product kit includes the parts needed for complete and easy installation of the adaptor kit in RITAL square hole racks, and some third-party racks.

Tip commander serves as a remote control for execution of passive tests, when used in combination with A 1460. Or for execution of 4-wire continuity test when used directly from MI 3325. The commander has a built in LED torch lamp including PASS/FAIL status LED's and start key for execution of the tests. When used directly from MI 3325 the connection cable A 1583 must be used.

A 1586 is a rack mount adapter for 19” rack, which is designed to hold the A 1460 CE Adapter. This product kit includes the parts needed for complete and easy installation of the adaptor kit in RITAL square hole racks, and some third-party racks.

Large robust Kelvin crocodile clip for accurate resistance measurements on larger objects.

Large robust crocodile clip for resistance measurements on larger objects.

Large robust crocodile clip for resistance measurements on larger objects.

HV test clip with cable for best contacting of different contact surfaces with 35 mm jaw opening.

HV test clip with cable for best contacting of different contact surfaces with 35 mm jaw opening.

HV test clip with cable for best contacting of different contact surfaces with 35 mm jaw opening.

HV test clip with cable for best contacting of different contact surfaces with 35 mm jaw opening.

HV test clip with cable for best contacting of different contact surfaces with 35 mm jaw opening.

HV test clip with cable for best contacting of different contact surfaces with 35 mm jaw opening.

Barcode scanner for identification of barcode labelled appliances.

2D Barcode scanner for identification of barcode labelled appliances

Barcode scanner for identification of barcode labelled appliances.

QR / Barcode scanner for identification of barcode labelled appliances.

Connection cable for use of A 1511 tip commander directly from MI 3325.

The adapteris designed to enable use of remote pedal and LED signal lights connected to the instrument.

3-phase adapter for measurements of discharge time on machinery and switchgear, equipped with 16A CEE 3P socket.

Adapter for measurements of discharge time on machinery and switchgear.

High voltage safety test probe for manual high voltage testing. The test tip is protected by an arc-resistant teflon tube, and it has built in almost wear-free lungsten which assures a long lifetime.

High voltage safety test probe for manual high voltage testing. The test tip is protected by an arc-resistant teflon tube, and it has built in almost wear-free lungsten which assures a long lifetime.

Provides a thorough and expeditious solution in the execution of auto tests via a single test terminal, A 1511 2M5 included in set.

High voltage test leads with pistols for measurements on larger electrical equipment.

High voltage safety test probe for manual high voltage testing. The test tip is protected by an arc-resistant teflon tube, and it has built in almost wear-free lungsten which assures a long lifetime.

High voltage safety test probe for manual high voltage testing. The test tip is protected by an arc-resistant teflon tube, and it has built in almost wear-free lungsten which assures a long lifetime.

Warning lamps visually signalize ongoing HV insulation test and warn the user about dangerous voltage conditions.

Licence key for an additional FW profile and BASIC MESM functionality.

SDK licence key for instrument integration with 3rd party SW. Please contact your local dealr for more information on how to order the licence key.

The aMESM is an advanced portable appliance safety Testing tool for Android devices. The Application is free for download from the Android Market via Google Play. For a full-featured application, a special licence is needed. Please contact your local distributer for further information.

Calibration Box for checking insulation measurements in the field (max. test voltage = 5kV).

3-wire test lead for measuring of single or three phase systems.