MI 3121H Standard set
Sets
- Instrument Smartec 2,5 kV Insulation / Continuity
- Soft hand strap
- Test lead, 2 x 1.5 m
- Test probe, 2 pcs (black, red)
- Crocodile clip, 2 pcs (black, red)
- Power supply adapter + 6 NiMH rechargeable batteries, type AA
- Calibration certificate
- Short nstruction manual
- Instruction manual*
Do you own this product?
Optional accessories
S 2080 1.2 V, 2100 mAh AA rechargeable batteries type AA, 6 pcs
A set of 6 pieces of rechargeable batteries type AA.
A 1160 Fast charger for 8 AA batteries with a set of 6 NiMH bat., type AA
Fast battery charger for up to 8 pieces of AA rechargeable batteries, and a set of 6 pcs NiMH rechargeable batteries, type AA.
S 2058 Insulation test plates
Two in one: Test plates for measurement of floor and wall insulation, ∆625 cm2 (acc. to EN 60364-6) and measurement of semi conductivity, 2,5 kg, Ø65 mm (acc. to EN 61340-4-1).
A 1289 Soft padded carrying bag, Size: M
Large soft carrying bag for transport and storage of test instrument and belonging accessories.
Technical data
- Dimensions: 170 x 250 x 240 mm
A 1291 PC SW EuroLink PRO with USB and RS232-PS/2 cable
PC Software EuroLink PRO enables downloading and test results management and printing of test reports. Delivered with RS232-PS/2 and USB communication cables.
A 1309 Crocodile clip, green
Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.
A 1271 Soft carrying bag, Size: S
Small soft carrying bag for transport and storage of test instrument or accessories.
A 1319 2.5 kV test lead, 3 x 1.5 m
3-wire test lead with GUARD connection for insulation resistance measurements with test voltage up to 2,5 kV. Recommended to be used when measuring high insulation resistances (>10 GΩ).
A 1737 Carrying case
Case with foam inserts with slots for a Eurotest multifunctional electrical installation safety tester and MI 3309 BT DeltaGT. Multiple possible instrument & accessory combinations. We recommend the MI 3110 EurotestIT, MI 3309 DeltaPAT, MD 9231 AC/DC current clamp and A 1207 three phase adapter combination.
Technical data
- Dimensions: 590 x 470 x 270 mm
- Mass: 6.0 kg
A 1778 Magnetic contact probe
The A 1778 magnetic probe (with a Ø6.6 mm right-angle magnetic adapter and a Ø4 mm socket) is designed for semi-temporary measurement of voltage on steel screw terminal blocks.
S 2138 Set of wheels for carrying cases A 1736, A 1737, A 1738
Wheels and trolley that can be added to carrying cases for easier transport.
S 2143 Set of test probes CAT II FI 2 black, blue, green METREL
Test probes with 2 mm diameter test tip to fit testing holes incorporated in the various connectors and to reach measurement locations unreachable by test probes with 4 mm diameter test tip.
Where to buy?
Search for distributors and partners
Have a question?
Speak with a specialist
