MI 3110 Standard set Featured
Sets
- Instrument EurotestIM
- Soft carrying bag
- Mains measuring cable
- Test lead, 3 x 1.5 m
- Test probe, 3 pcs
- Crocodile clip, 3 pcs
- Set of carrying straps
- RS232-PS/2 cable
- USB cable
- Set of NiMH battery cells
- Power supply adapter
- Calibration certificate
- Short instruction manual
- Instruction manual*
- PC Software SW 0101 EuroLink PRO*
Do you own this product?
Optional accessories
A 1292 Eurolink PRO to EuroLink PRO Plus (Licence)
Password for upgrading standard PC software EuroLink PRO to advanced PC SW EuroLink PRO Plus with professional report creation facility.
A 1314 Plug commander
Single phase, 3-pin plug commander with TEST, MEM and function selection buttons and RGB LED status indicator.
A 1401 Tip commander
Single phase, 3-wire tip commander with TEST, MEM and function selection buttons, RGB LED status indicator and front LED lamp.
S 2080 1.2 V, 2100 mAh AA rechargeable batteries type AA, 6 pcs
A set of 6 pieces of rechargeable batteries type AA.
A 1160 Fast charger for 8 AA batteries with a set of 6 NiMH bat., type AA
Fast battery charger for up to 8 pieces of AA rechargeable batteries, and a set of 6 pcs NiMH rechargeable batteries, type AA.
S 2058 Insulation test plates
Two in one: Test plates for measurement of floor and wall insulation, ∆625 cm2 (acc. to EN 60364-6) and measurement of semi conductivity, 2,5 kg, Ø65 mm (acc. to EN 61340-4-1).
A 1270 Tip commander (for Smartec)
Single phase 2-wire commander with test tip, TEST and MEM function keys for installation safety measurements.
A 1272 Plug commander (for Smartec)
Single phase schuko plug commander with TEST and MEM function keys for fast and simple measurements on one phase sockets.
A 1737 Carrying case
Case with foam inserts with slots for a Eurotest multifunctional electrical installation safety tester and MI 3309 BT DeltaGT. Multiple possible instrument & accessory combinations. We recommend the MI 3110 EurotestIT, MI 3309 DeltaPAT, MD 9231 AC/DC current clamp and A 1207 three phase adapter combination.
Technical data
- Dimensions: 590 x 470 x 270 mm
- Mass: 6.0 kg
S 2138 Set of wheels for carrying cases A 1736, A 1737, A 1738
Wheels and trolley that can be added to carrying cases for easier transport.
S 2143 Set of test probes CAT II FI 2 black, blue, green METREL
Test probes with 2 mm diameter test tip to fit testing holes incorporated in the various connectors and to reach measurement locations unreachable by test probes with 4 mm diameter test tip.
Where to buy?
Search for distributors and partners
Have a question?
Speak with a specialist
