MI 2093 Standard set
Sets
- Transmitter T10K
- Receiver R10K
- Test lead for R10K with built-in resistor and test probe, 1.5 m
- Test lead for T10K, 1.5 m, 2 pcs
- Special selective probe
- Test probe, black, 2 pcs
- Crocodile clip, black, 2 pcs
- Soft carrying bag
- Instruction manual
Do you own this product?
Optional accessories
A 1019 Current clamp
Current clamp 1000 A / 1 A with jaw opening 52 mm for general current measurements and in combination with A 1018 for earth resistance measurement without breaking the loop.
A 1160 Fast charger for 8 AA batteries with a set of 6 NiMH bat., type AA
Fast battery charger for up to 8 pieces of AA rechargeable batteries, and a set of 6 pcs NiMH rechargeable batteries, type AA.
A 1074 Mini current clamp 200 A / 0.2 A
Mini current clamp 200 A / 0.2 A with jaw opening 15 mm for current measurement in confined spaces.
A 1192 Selective probe for R10K
Very sensitive inductive sensor serves for contactless fuse and cable finding. To be used with A 1191.
A 1169 Fast charger for AA, C, D and 9 V block batteries
Fast battery charger for up to 12 pcs AA, 6 pcs C or D rechargeable batteries, 4 pcs 9 V block batteries.
A 1067 Test lead for R10K, 1.5 m, with built-in resistor
Test lead with probe enables fast and accurate fuse finding and current circuit allocation. To be used with A 1191.
A 1068 Connection cable for clamp, 1.5 m
Connection cable for connecting current clamp on the instrument MI 2093.
A 1014 Test probe, black
Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.
A 1013 Crocodile clip, black
Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.
A 1020 Small soft carrying bag
Small soft carrying bag for transport and storage of test instrument or accessories.
Technical data
- Dimensions: 280 x 160 x 110 mm
Where to buy?
Search for distributors and partners
Have a question?
Speak with a specialist
