A 1676 Single chamber test cage

This safety module is a production friendly safety component that does not physically impact on the actions of the operator. The goal of light curtains is to provide safety by ceasing test system operations if an object crosses a specified safety zone. The light curtains monitor if any object has breached inside the prohibition zone, if the light curtains detect a breach the safety module will disconnect the measuring circuits from the mains.

 

S 2110 Standard set

• S 2110 Safety system with safety light curtains
• A 1728 Mains cable C13 / Schuko, 3 x 0.75 mm2, 2 m
• A 1690 Start button
• A 1689 Emergency stop button
• A 1017 Communication cable, RS232, 2 m

Diversity of electronic products, which need to be tested, present a many challenges for the manufacturers. Different sizes, shapes and configurations of electronic devices make it challenging for electrical safety examination. Due to these facts Metrel has developed different types of connection boxes, which can be easily adopted to customer’s needs. The A 1626 connection box is a passive devices that acts as a connection interface between the CE SWITCH and the tested equipment. It is intended for connection of various 1-phase appliances to A 1600 CE SWITCH. Equipment with supply cord, equipment intended for fixed installation, electronic subassemblies can be tested. Connections for connection to isolated conductive parts and earthed parts are added. The connection box is coded in order to prevent from applying a too high test voltage to its outputs.

 

A 1626 Standard set

• A 1626 Connection box, 1-phase
• A 1710 Test lead, red, 1.5 m
• A 1064 Crocodile clip, red

Diversity of electronic products, which need to be tested, present a many challenges for the manufacturers. Different sizes, shapes and configurations of electronic devices make it challenging for electrical safety examination. Due to these facts Metrel has developed different types of connection boxes, which can be easily adopted to customer’s needs. The A 1627 connection box is a passive devices that acts as a connection interface between the CE SWITCH and the tested equipment. It is intended for connection of various 1- and 3-phase appliances to A 1600 CE SWITCH. Equipment with supply cord, equipment intended for fixed installation, electronic subassemblies can be tested. Connections for connection to isolated conductive parts and earthed parts are added. The connection box is coded in order to prevent from applying a too high test voltage to its outputs.